Pair Remote with DriveUpdated a month ago
The wireless remote controller syncs automatically to the main drive unit once both are turned on.
1) Turn on the main drive unit.
After it sounds the start up beeps, it will begin to sound two beeps as it awaits connection to the remote (two same-tone beeps - pause, two same-tone beeps - pause, for total of 5 times and then the beeping will stop).
2) You can turn the remote on at any time, you do not have to wait for the beeping to stop.
3) When they sync, the drive will sound two very rapid beeps, signaling the two have paired.
If the remote controller is already on when you power on the drive - it will sound the rapid double beeps immediately.
Note: they must remain within 10-15 feet of each other to maintain this connection 👍
Was this article helpful?