SwiftPaws Support logo
SwiftPaws Support logo

All articles

Plugging the battery into the main drive unit.Updated 5 months ago


This connector on the battery:  (can be a different color)

Plugs into the port inside the battery compartment:

Be sure the plug is tightly seated as shown below

It is a tight fit. It is difficult to grasp the plug to unplug it - it is fine to pull the wires, they are firmly attached to the connector plug.

Always unplug the battery when not in use. Do not leave battery connected to the drive when not in use. 

To avoid damaging the connector in the drive - pull the battery connector straight up:

See this video to learn how to easily remove the battery cover and open the pulley lids! https://support.swiftpaws.com/en-US/how-to-open-the-lid-battery-cover-22097 

Was this article helpful?
Yes
No