SwiftPaws Support logo
SwiftPaws Support logo

All articles

Unplug Battery When Not In Use!Updated 2 years ago

Leaving the LiPo battery plugged into the main drive unit when not in use is not recommended. The switch may get accidentally turned on and the battery will continue to drain - and if the voltage drops below the minimum voltage. This will permanently damage the battery. Protect your investment - ALWAYS disconnect the battery plug from the drive when not in use.


CAUTION: The battery should always be allowed to come to room-temperature before charging. Charging a hot or cold battery might delay charging or damage the battery. For best results, charge the battery at temperatures between 50º and 80ºF (10º-30ºC).

Disclaimer

The advice given above is general in nature and you are responsible for the safety of your batteries. SwiftPaws is not responsible for any direct, indirect, special, or consequential damages and personal injuries, including that to life, and health, resulting from the customer’s application and use of batteries sold by SwiftPaws.com.

Was this article helpful?
Yes
No