IMPORTANT: Do not remove the "wrapper" from the battery!
Unplug the battery from the charger before plugging it into the drive.
The charger has two different ports but only the four pin port is used.
When you first plug in the battery & charger - all three (3) LED lights should turn red. Even if you just took it off the charger. This is normal.
Once the battery is fully charged - all three (3) LED lights will turn green.
Your SwiftPaws will work best on a fully charged battery.
If any LED does not turn green, your battery won't be fully charged and should be replaced.
Each cell holds a 3.7v charge - if one cell is not working, this will decrease the total charge of your battery.