The Home Original drive requires a 3 cell, 11.1v Lipo battery
You may purchase a compatible battery anywhere LiPo batteries are sold using these specs:
- 11.1v LiPo battery - this number should not vary
- 3 cell (3S) - this number should not vary
- 1550 mAh - this is the capacity - this number can vary - the bigger the number the longer it will last on a single charge
- 25C - this is the discharge rate - this number can vary but should be at least 25
NOTE: the larger mAh number it will last on a single charge but the battery will be physically larger & it will take longer to recharge.
The connectors are: XT60 connector (plugs into drive unit) & JST-XHR-4P connector (plugs into battery charger)
Note: Some batteries are better than others. Any links provided are examples and not recommendations. Be sure to purchase from a trust the seller and verify that all the specs are compatible before purchasing.
CAUTION: The battery should always be allowed to come to room-temperature before charging. Charging a hot or cold battery might delay charging or damage the battery. For best results, charge the battery at temperatures between 50º and 80ºF (10º-30ºC).
Disclaimer
The advice given above is general in nature and you are responsible for the safety of your batteries. SwiftPaws is not responsible for any direct, indirect, special, or consequential damages and personal injuries, including that to life, and health, resulting from the customer’s application and use of batteries.