Using the ♾️universal remote to control Chase.
The Chase device will connect to the remote if it is not already connected to an app or another remote. So if it's not connecting - check that all apps are completely closed (swipe up) and that all other remotes are turned off.
Then, make sure the blue light on the bottom of the Chase drive is blinking slowly - about once per second - this indicates that it has power.
Turn the remote on by pressing the power button – the remote will vibrate three (3) times and the LED will begin to blink green.
When the blue light on the bottom of the drive blinks more slowly, about once every three seconds - this indicates that it is paired.
When you move the remote's trigger wheel in either direction, the LED will stop blinking and stay steady, and you are ready to play.